Saturday, November 23, 2019

Conversion Factor Definition and Examples

Conversion Factor Definition and Examples A conversion factor is the number or formula you need to convert a measurement in one set of units to the same measurement in another set of units. The number is usually given as a numerical ratio or fraction that can be used as a multiplication factor. For example, say you have a length that is measured in feet and you wish to report on it in meters. If you know that there are 3.048 feet in a meter, then you can use that as a conversion factor to determine what the same distance is in meters.   One foot is 12 inches long, and the conversion factor of 1 foot to inches is 12. In yards, 1 foot is equal to 1/3 yard (conversion factor of 1 foot to yards is 1/3) so forth. The same length is 0.3048 meters, and it is also 30.48 centimeters. To convert 10 feet to inches, multiply 10 times 12 (the conversion factor) 120 inchesTo convert 10 feet to yards, multiply 10 x 1/3 3.3333 yards (or 3 1/3 yards)To convert 10 feet to meters, multiply 10 x .3048 3.048 metersTo convert 10 feet to centimeters, multiply 10 x 30.48 304.8 centimeters Examples of Conversion Factors There many different types of measurements that sometimes require conversions: length (linear), area (two dimensional) and volume (three dimensional) are the most common, but you can also use conversion factors to convert mass, speed, density, and force. Conversion factors are used for conversions within the imperial system (feet, pounds, gallons), within the International System of Units (SI, and the modern form of the metric system: meters, kilograms, liters) or across the two.   Remember, the two values must represent the same quantity as each other. For example, its possible to convert between two units of mass (e.g., grams to pounds), but you generally cant convert between units of mass and volume (e.g., grams to gallons). Examples of conversion factors include: 1 gallon 3.78541 liters (volume)  1 pound 16 ounces (mass)  1 kilogram 1,000 grams (mass)  1 pound 453.592 grams (mass)1 minute 60000 milliseconds (time)  1 square mile 2.58999 square kilometers (area)   Using a Conversion Factor For example, to change a time measurement from hours to days, use a conversion factor of 1 day 24 hours. time in days time in hours x (1 day/24 hours) The (1 day/24 hours) is the conversion factor. Note that following the equal sign, the units for hours cancel out, leaving only the unit for days.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.